BETAFPV Pavo20 Pro 93.7mm 3S 2.2 Inch Brushless Whoop RC FPV Racing Drone NO VTX NO Camera Support DJI O4 Pro Air Unit Digital System
22
Talu Diogel wedi'i Warantu

Bydd eitemau a ddychwelir yn cael eu derbyn o fewn 40 diwrnod o'r dyddiad o dderbyn y nwyddau. Ni ellir dychwelyd na chyfnewid eitemau wedi'u cyfaddasu. Ni ellir dychwelyd eitemau a brynwyd gyda cherdyn rhodd e; dim ond cyfnewid y gellir eu gwneud.
Rhodd Am Ddim
Croeso i Roymall, eich gwefan broffesiynol ar gyfer prynu rhoddion siopau adran premium. Rydym yn gwerthfawrogi ac yn gwerthfawrogi eich cefnogaeth, ac rydym am fynegi ein diolch trwy ychwanegu cyffro ychwanegol at eich pryniadau. Pan fyddwch yn siopa gyda ni, nid yn unig y byddwch yn cael mwynhau cynnyrch o ansawdd uchel sy'n gwella eich ffordd o fyw, ond byddwch hefyd yn derbyn rhodd am ddim gyda phob archeb a wnewch. Barod i archwilio ein casgliad a dod o hyd i'ch rhoddion perffaith? Poriwch ein dewis o eitemau siop adran premium, gwneud eich archeb, ac edrych ymlaen at y cyffro o gael eich rhodd am ddim yn dod ochr yn ochr â'ch pryniad.Polisi Cludo
Byddwn yn gweithio'n galed i gyflwyno eitemau atoch ar ôl derbyn eich archebion a sicrhau eu bod yn cyrraedd yn ddiogel. Bydd manylion cludo yn cael eu darparu yn eich e-bost cadarnhau.Yn y rhan fwyaf o achosion, mae archebion yn cael eu prosesu o fewn 2 ddiwrnod.O dan amgylchiadau arbennig, bydd yn cael ei oedi fel a ganlyn: Pan fyddwch yn gwneud archeb ar ddydd Sadwrn, dydd Sul neu wyliau cyhoeddus, bydd yn cael ei oedi am 2 ddiwrnod..Yn nodweddiadol, mae angen 5-7 diwrnod gwaith (dydd Llun i ddydd Gwener) heb gael eu heffeithio gan oedi hedfan neu ffactorau amgylcheddol eraill..Gan fod ein gwasanaeth cludo yn fyd-eang, bydd yr amseroedd cludo yn dibynnu ar eich lleoliad, felly gall gymryd ychydig o amser ac, os gwelwch yn dda, aros yn amyneddgar os ydych yn ardaloedd neu wledydd anghysbell.1. Polisi Dychwelyd a Chyfnewid
Dim ond eitemau a brynwyd ar roymall.com y byddwn yn eu derbyn. Os ydych yn prynu gan ein dosbarthwyr lleol neu fanwerthwyr eraill, ni allwch eu dychwelyd atom ni. Ni fydd eitemau gwerthu terfynol neu roddion am ddim yn cael eu derbyn ar gyfer dychwelyd. I fod yn gymwys i'w dychwelyd, rhaid i'ch eitem fod yn heb ei defnyddio ac yn yr un cyflwr ag yr oedd pan gawsoch hi. Rhaid iddi hefyd fod yn y pecyn gwreiddiol.Ar ôl derbyn cyfarwyddiadau dychwelyd gennym, os gwelwch yn dda, pecynwch eich eitemau a ddychwelwyd a gollwng eich pecyn yn y swyddfa bost leol neu gludwr arall.Byddwn yn prosesu'ch eitem a ddychwelwyd neu a gyfnewidir o fewn 3-5 diwrnod gwaith ar ôl iddo gyrraedd. Bydd yr ad-daliad yn cael ei brosesu a'i gredyd yn awtomatig i'ch dull talu gwreiddiol.Ni ellir derbyn dychweliadau na chyfnewidiadau os cafodd y cynnyrch ei gynhyrchu'n bersonol, gan gynnwys maint wedi'i gyfaddasu, lliw wedi'i gyfaddasu neu argraff wedi'i gyfaddasu.Angen mwy o help, os gwelwch yn dda, cysylltwch â ni. service@roymall.com neu Whatsapp: +8619359849471
2.Polisi Ad-dalu
Byddwch yn cael ad-daliad llawn neu gredyd siop 100% ar ôl i ni dderbyn y pecyn a ddychwelwyd a'i wirio. Bydd yr ad-daliad yn cael ei brosesu a'i gredyd yn awtomatig i'ch dull talu gwreiddiol. Sylwch nad yw costau cludo ac unrhyw drethi neu ffi yn cael eu had-dalu. Nid yw'r costau cludo ychwanegol yn cael eu had-dalu ar ôl i'r pecyn gael ei anfon. Rydych chi'n gyfrifol am dalu'r ffioedd hyn, ac ni allwn eu hosgoi na'u had-dalu, hyd yn oed os yw'r archeb yn cael ei dychwelyd atom ni.Ar ôl derbyn a chadarnhau'ch eitem a ddychwelwyd, byddwn yn anfon e-bost atoch i'ch hysbysu ein bod wedi derbyn eich eitem a ddychwelwyd. Byddwn hefyd yn eich hysbysu am gymeradwyo neu wrthod eich ad-daliad.Os oes gennych unrhyw broblemau ynghylch y broses ad-dalu, os gwelwch yn dda, cysylltwch â ni. service@roymall.com neu Whatsapp: +8619359849471
Notice:
The pictures are for display only. This product does not have VTX and camera, please buy them separately.
Description:
The 2.2 Inch Pavo20 Pro redefines lightweight freestyle performance, offering expanded compatibility with both DJI O3 Air Unit and the new DJI O4 Air Unit Pro-all under 150g. Engineered for cinematic agilty, it pairs the explosive thrust of LAV 1104 | 7200KV Brushless Motors and 2.2u2033 Gemfan 2218 3-Blade Props with an aerodynamic frame design that delivers an 8u201311% thrust boost, pushing flight times up to 6"40"". The injection-molded HD VTX bracket features dual camera mounting holes for DJI O3/O4 Pro wide-angle shooting and optimized antenna fixing for stable signal clarity. Combined with the rubber dampers, this setup eliminates jitter and vibrations, ensuring silky-smooth footage even during aggressive maneuvers.
Feature:
1. Lightweight Powerhous: Weighing under 150g, this 2.2u2033 pocket-size cinewhoop is the perfect gateway for DJI pilots to dive into FPV-now with expanded DJI O4 Air Unit Pro compatibility.
2. Freestyle-Optimized Propulsion: The GF 2218 3-Blade Props (co-developed with Gemfan) and LAV 1104 | 7200KV Brushless Motors offers unparalleled thrust, while the aerodynamic frame adds an 8u201311% boost for aggressive maneuvers.
3. Extended Flight Performance: Powered by the LAV 3S 550mAh 75C Battery, enjoy up to 6"40"" flight time.
4. Cinematic Stability: The injection-molded HD VTX and Pavo Series" Classic Rubber Damper ensures jitter-free footage, while the dual cam fixed holes for DJI O3/O4 Pro wide-angle shooting and optimized anntenna holder gurantees every frame you captured is perfect.
5. Flight Controller: The ultra-light F4 2-3S 20A AIO FC V1 (5.92g) is optimized for HD digital VTX. Its improved computing power and rapid response make it an ideal choice for Freestyle.
6. Modular HD VTX Bracket System: Easily swap between the DJI O3 Air Unit Bracket and O4 Air Unit Pro Bracket to accommodate your preferred HD VTX.
7. ND Filter Compatibility: ND/UV/CPL filters for DJI O3 and ND/UV filters for O4 Pro let you master any lighting condition.
Specification:
Brand: BETAFPV
Model: Pavo20 Pro (O4 Pro PNP)
Wheelbase: 93.7mm
Battery Connector: XT30
Battery Slot: 20mm * unlimited height
FC: F4 2-3S 20A AIO FC V1
Frame: Pavo20 Pro Brushless Frame
Motor: LAV Series 1104 | 7200KV Brushless Motors
Props: Gemfan 2218 3-Blade Propellers (1.5mm Shaft)
Flight Time: 6"40"" (with LAV Series 3S 550mAh Battery)
Camera Filter Installation: Vertical
RX Version: ELRS,SBUS
HD VTX Bracket: O4 Air Unit Pro Bracket
Weight: 71g (O4 Pro PNP Version)
Supported VTX(Not included): DJI O4 Air Unit Pro (with O4 Air Unit Pro Bracket)
Recommended Filter(Not included): ND Filter for O4 Pro Camera
Recommended Battery(Not included): LAV 3S 450mAh 75C Battery, LAV 3S 550mAh 75C Battery, 3S 650mAh Battery
Recommend Parts:
FC&ESC: F4 2-3S 20A AIO FC V1
Motor: LAV Series 1104 | 7200KV Brushless Motors
Propellers: Gemfan 2218 3-Blade Propellers (1.5mm Shaft)
Frame: Pavo20 Pro Brushless Whoop Frame
Battery(Not included): LAV 3S 450mAh 75C Battery, LAV 3S 550mAh 75C Battery
Filter(Not included): ND Filter for O4 Pro Camera
VTX(Not included): DJI O4 Pro
Package Included:
1 * Pavo20 Pro Brushless Whoop
1 * O4 Air Unit Pro Bracket
1 * HD VTX Bracket Screw Package
1 * Pavo Series COB LED Strip Accessory Kit (Ice Blue)
4 * Gemfan 2218 3-Blade Propellers (1.5mm Shaft)
1 * PCBA | Type-C Adapter Board
1 * 4Pin Adapter Cable
The pictures are for display only. This product does not have VTX and camera, please buy them separately.
Description:
The 2.2 Inch Pavo20 Pro redefines lightweight freestyle performance, offering expanded compatibility with both DJI O3 Air Unit and the new DJI O4 Air Unit Pro-all under 150g. Engineered for cinematic agilty, it pairs the explosive thrust of LAV 1104 | 7200KV Brushless Motors and 2.2u2033 Gemfan 2218 3-Blade Props with an aerodynamic frame design that delivers an 8u201311% thrust boost, pushing flight times up to 6"40"". The injection-molded HD VTX bracket features dual camera mounting holes for DJI O3/O4 Pro wide-angle shooting and optimized antenna fixing for stable signal clarity. Combined with the rubber dampers, this setup eliminates jitter and vibrations, ensuring silky-smooth footage even during aggressive maneuvers.
Feature:
1. Lightweight Powerhous: Weighing under 150g, this 2.2u2033 pocket-size cinewhoop is the perfect gateway for DJI pilots to dive into FPV-now with expanded DJI O4 Air Unit Pro compatibility.
2. Freestyle-Optimized Propulsion: The GF 2218 3-Blade Props (co-developed with Gemfan) and LAV 1104 | 7200KV Brushless Motors offers unparalleled thrust, while the aerodynamic frame adds an 8u201311% boost for aggressive maneuvers.
3. Extended Flight Performance: Powered by the LAV 3S 550mAh 75C Battery, enjoy up to 6"40"" flight time.
4. Cinematic Stability: The injection-molded HD VTX and Pavo Series" Classic Rubber Damper ensures jitter-free footage, while the dual cam fixed holes for DJI O3/O4 Pro wide-angle shooting and optimized anntenna holder gurantees every frame you captured is perfect.
5. Flight Controller: The ultra-light F4 2-3S 20A AIO FC V1 (5.92g) is optimized for HD digital VTX. Its improved computing power and rapid response make it an ideal choice for Freestyle.
6. Modular HD VTX Bracket System: Easily swap between the DJI O3 Air Unit Bracket and O4 Air Unit Pro Bracket to accommodate your preferred HD VTX.
7. ND Filter Compatibility: ND/UV/CPL filters for DJI O3 and ND/UV filters for O4 Pro let you master any lighting condition.
Specification:
Brand: BETAFPV
Model: Pavo20 Pro (O4 Pro PNP)
Wheelbase: 93.7mm
Battery Connector: XT30
Battery Slot: 20mm * unlimited height
FC: F4 2-3S 20A AIO FC V1
Frame: Pavo20 Pro Brushless Frame
Motor: LAV Series 1104 | 7200KV Brushless Motors
Props: Gemfan 2218 3-Blade Propellers (1.5mm Shaft)
Flight Time: 6"40"" (with LAV Series 3S 550mAh Battery)
Camera Filter Installation: Vertical
RX Version: ELRS,SBUS
HD VTX Bracket: O4 Air Unit Pro Bracket
Weight: 71g (O4 Pro PNP Version)
Supported VTX(Not included): DJI O4 Air Unit Pro (with O4 Air Unit Pro Bracket)
Recommended Filter(Not included): ND Filter for O4 Pro Camera
Recommended Battery(Not included): LAV 3S 450mAh 75C Battery, LAV 3S 550mAh 75C Battery, 3S 650mAh Battery
Recommend Parts:
FC&ESC: F4 2-3S 20A AIO FC V1
Motor: LAV Series 1104 | 7200KV Brushless Motors
Propellers: Gemfan 2218 3-Blade Propellers (1.5mm Shaft)
Frame: Pavo20 Pro Brushless Whoop Frame
Battery(Not included): LAV 3S 450mAh 75C Battery, LAV 3S 550mAh 75C Battery
Filter(Not included): ND Filter for O4 Pro Camera
VTX(Not included): DJI O4 Pro
Package Included:
1 * Pavo20 Pro Brushless Whoop
1 * O4 Air Unit Pro Bracket
1 * HD VTX Bracket Screw Package
1 * Pavo Series COB LED Strip Accessory Kit (Ice Blue)
4 * Gemfan 2218 3-Blade Propellers (1.5mm Shaft)
1 * PCBA | Type-C Adapter Board
1 * 4Pin Adapter Cable